The i2.5 Difference...

Offering unique features, unlimited uses and easy maintenance, the i2.5 ingrade creates a category of its own while remaining leak free.

Holding a patent for its potted factory seal and grade level jbox, the i2.5 also has patents pending for the lens ring hinge, the two captive screws that require no torque, the compartmentalization of the three major internal chambers and the anti-wicking wiring.

Furnishing tool-less LOC-AIM® capability, the optical assembly locks in place to ensure the tilt and rotation are held tight without concern of the optics shifting. If the angle needs to be adjusted, simply loosen a thumb screw and change the tilt.

Three separate, sealed compartments isolate the lamp, keeping the lens cool, while withstanding up to 3,000 lb live-load.

All accessories can be field-installed without disrupting the optics, and are designed so installation is quick and effortless.

The i2.5 is fully assembled at the factory, only having to field wire and install the lamp on the job site, making installation faster and less expensive. And, with a choice of heavy-duty stainless steel or brass accessories, the luminaire is sure to withstand all yard and walkway maintenance equipment and vandalism.

Pressure Tested

Pressure tested and UL/cUL listed, ensuring the luminaire will not leak. The i2.5 is also dual rated IP66/IP68 to 1 meter.

Two Captive Screws

Access the optical assembly via two captive, no torque screws. There is no risk of losing the screws during maintenance, and no special tools are required for opening or securing the lens ring.

Choice of Finishes

Choice of heavy-duty stainless steel or brass to match other luminaires onsite, and to withstand external stressors.

Hinged Lens Ring

Hinged lens ring opens past 90º by loosening two captive screws, allowing easy hands-free access to the optical and ballast assembly.

Watertight Junction Box

Junction box uses 2 captive screws that require no torque, with a gasket directly adhered to ensure a proper watertight seal every time. No encapsulant or conduit seal required.

Quick-connect Wiring

Quick-connect wiring and lamp wiring facilitates quicker maintenance, saving time and money.

Separate Sealed Compartments

Three separate sealed compartments keep the lens cool, extend luminaire life and increase energy efficiency.

Electronic Ballast

Electronic ballast provides optimum lamp performance and increased energy efficiency.